## version 
## language 
## codeset 0
;AddMem V3.0
;The help text
_help
;Usage: AddMem Startadress Endadress [CheckMem] [A1000Fast] [32Bit]\n\
;         [!PUBLIC] [CHIP] [FAST] [!24BITDMA] [LOCAL] [PRIORITY]\n\
; - The start and end addresses of the memory block must be aligned to eight\n\
; - The optional argument CheckMem enables checking of the added memory.\n\
; - A1000Fast sets the flags to PUBLIC|FAST|LOCAL|24BITDMA. The priority\n\
;   will be set to 0. The memory must be located in the range from $200000\n\
;   and $A00000.\n\
; - 32Bit sets the flags to PUBLIC|FAST and the priority to +5. If the\n\
;   end address is below $1000000, the Flag 24BitDMA will be set, too.\n\
; - !PUBLIC overrides the default; the memory will be not PUBLIC.\n\
; - CHIP overrides the calculated type; the memory type will be CHIP.\n\
; - FAST sets the memory type to FAST, overriding the precalculated type.\n\
; - !24BITDMA overrides the calculated location; the memory will marked as\n\
;   not beeing able to use ZorroII-DMA, even if its end address lies below\n\
;   $100000.\n\
; - LOCAL should be set if and only if the the memory device is not\n\
;   mounted on an AutoConfigurating card.\n\
; - PRIORITY is 0 by default. It determines which memory block will be\n\
;   used first. For normal FastMem it should be 0, for 32 bit memory +5.\n
;Error: Start address should not be zero
SNNTxt
;Bad start address value.\n
;Error: Start address should be aligned to 8 bytes
SBATxt
;Start address must be aligned to 8.\n
;Error: End address should not be zero
ENNTxt
;Bad end address value.\n
;Error: End address should be aligned to 8 bytes
EBATxt
;End address must be aligned to 8.\n
;Error: End address should be higher than start address
SBETxt
;Start address must be lower than end address.\n
;Error: Memory test failed
MTTxt
;WARNING: The requested memory has an error.\n
;Error: Bad memory range for A1000Fast
AFTxt
;Memory range not suitable for A1000Fast.\n
;Error: Bad priority value
BPTxt
;Priority must be between -128 and 127.\n
;Error: Memory would collide with chips
BRTxt
;The requested memory range is (partially) located in reserved areas.\n
;Error: Memory partially not mounted
BMTxt
;WARNING: The requested memory seems to be not valid.\n